| |
 |
|
 |  |
|
|
| RC5010 Tripod Stand, Triangular |
| Flat triangular top. Side length 125mm. Height 200mm. |
| |
| RC5011 Tripod Stand,
Triangular |
Mild Steel triangular top and legs. Legs bent
outwards for
stability. |
| |
| |
Top Side |
Height |
| -01 |
125mm |
150mm |
| -02 |
125mm |
200mm |
|
|
| |
| RC5012 Tripod Stand,
Circular |
| Circular top. Legs bent outwards for stability. |
| |
O.D. |
I.D. |
Height |
| -01 |
80mm |
125mm |
200mm |
| -02 |
110mm |
150mm |
200mm |
|
|
|
|
|
|
| RC5014 Alcohol Burner
Stand |
Ideal for use with alcohol burners. Made of nickel plated
steel
wire gauge. Height 125mm. |
| |
|
|
|
|
| RC5019 Alcohol Burner,
Aluminium |
Made of die pressed aluminum. Comes with a wick and
screw on cap. Height 100mm approx. Capacity 60ml. |
| |
| RC5020 Alcohol Burner,
Glass |
| Made of glass. Comes with a metal wick holder, wick
and glass stopper. Height 100mm approx. Capacity 120ml. |
|
|
|
 |
| RC5022 Bunsen Burner |
Nickel plated brass tube of 11mm diameter
with rotatable air regulator and a riffled gas inlet tube
of 9mm outer diameter mounted on heavy metal base.
| -01 |
Petrol Gas |
| -02 |
L.P. Gas |
|
| |
| RC5023 Bunsen Burner,
With Stopcock |
Same as RC5022, but provided with a stopcock
for gas regulation.
| -01 |
Petrol Gas |
| -02 |
L.P. Gas |
|
|
|
|
|
| RC5024 Meker Burner |
Nickel plated brass tube with rotatable air regulator,
perforated steel plate and riffled gas inlet tube 9mm
outer diameter. Top diameter 25mm. Mounted on a heavy
base.
| -01 |
Petrol Gas |
| -02 |
L.P. Gas |
|
| |
| RC5025 Meker Burner,
With Stopcock |
Same as RC5024, but provided with a stopcock
for gas regulation.
| -01 |
Petrol Gas |
| -02 |
L.P. Gas |
|
|
|
|
|
|
| RC5030 Rectangular Base |
Cast iron base having hammertone paint finish, with
hole for rod. Without rod.
| |
SIZE |
| -01 |
15x10cm |
| -02 |
20x12.5cm |
| -03 |
22.5x15cm |
|
|
|
|
|
| RC5031 Tripod Base |
| Cast iron base having hammertone paint finish, with
hole for rod. Without rod. |
|
|
|
|
|
| RC5034 Support Rod |
Plated steel rod, 13mm diameter, one end half round,
other end threaded for fitting into bases. Provided with
a through hole having a tommy bar for easy tightening
of the rod.
| |
Length |
| -01 |
500mm |
| -02 |
600mm |
| -03 |
750mm |
| -04 |
900mm |
|
|
|
|
|
| RC5036 Extension Ring |
Suitable for adjusting the ring from the support rod.
Made from powder coated steel.
| |
I.D. |
Length |
| -01 |
50mm |
200mm |
| -02 |
75mm |
255mm |
|
|
|
|
|
| RC5037 Ring, Retort |
Cast iron, duly powder coated. Provided with a boss
head to take rods up to 13mm diameter. The ring centre
is 120mm from the support rod centre.
| |
I.D. |
| -01 |
50mm |
| -02 |
75mm |
| -03 |
100mm |
| -04 |
125mm |
|
|
|
|
| |
